Hailea 6 Outlet Silent Air Motor ACO-9620
Power: 12W Voltage: 110/220V
Frequency: 50/60Hz
Output power: 14L/min
Dimensions: 224x163x126mm
Air outlet is adjustable.
Noise: 45Db
Instruction manual; The air motor is very easy to install and operate.
First, the aquarium above, must be placed in a dry place. If the aquarium has a cover, it can be placed on the aquarium.
Particular attention should be paid to the fact that it is above. Otherwise, the pump may malfunction when there is a return of water to the pump.
After the pump is placed in a suitable place, the pump is ready for use by attaching the hose to the end of the air outlet pipe, which is suitable for the air motor.
It is recommended to have a long air hose and use an air stone to ensure good performance.
Warnings;
* Before using the pump, the socket it will be plugged into should be checked. Faults in the outlet can cause deterioration of the tool.
* The socket where the pump will be installed and the position of the pump are important. It needs to be up and far away in a place that it can not get wet. * If the pump is placed down from the aquarium, the pump may break down because there will be a backflow of water.
* Care should be taken that the pump is in a dry place above the aquarium. It should not be dropped into the aquarium. In the event of downfall it could not be taken out from the water without unplugging. It may cause electric shock.
* If the pump falls into water, it should be allowed to dry for a few days after unplugging it. It can be operated again after making sure that it is dry.
* It should never be lubricated.
* Hose control must be done once a week.
If there is a blockage, it should be removed by using a special hose brush.
