Solaris Convector Heater Manual 2000 Watt KIP4570M20

Solaris Convector Heater Manual 2000 Watt KIP4570M20 - It is a model of the İvigo brand

Note: In the model selection table, the outdoor temperature is taken as 8-10 degrees. The heat requirement depends on factors such as the temperature of the outdoor area, the thermal insulation of the room, and the number of door opening/closing times. The values in the table are valid for average conditions, so the specified factors should be taken into account when calculating the power of the heater.

All models of Solaris Convector Heaters, available in 1000, 2000 and 2500 watt alternatives; In addition to its stylish design and powerful heating advantage, all its devices, which allow it to be used either portable or fixed, are free of charge.

The front cover and body of Electric Convector Heaters are made of sheet metal suitable for cold forming. The device provides heating with the fins on the resistance placed inside. Cold air entering through the channels on the lower skirt of the body passes through the heated wings of the resistance and comes out as hot air through the air channels on the front cover. The air circulating in this way heats the environment by natural heat convection.

The paint used in the heaters does not contain any chemicals harmful to human health.

Solaris 2000W Manual Electric Convector Heater KIP4570M20 Technical Specifications
Height: 450 mm
Length: 700 mm
Depth: 80 mm
Weight: 5.4 kg
Electric Power: 1000-2000 W
Voltage: 220-240 V
Current: 8.7 A
Frequency: 50-60 Hz
Electronic Room Temperature Control: No
On/Off Switch: Yes
Cable Length: 1.5 m
Protection Class: I
Over Temperature Protection Thermostat: Yes
Mechanical Thermostat Control: Yes
Power Consumption Indicator: None
Ambient Temperature Display: None
Daily Programming: None
Weekly Programming: None
Smart Start (Adaptive Start): None
Energy Consumption Tracking: No
Color: White RAL9016(Standard)
Standard: TS EN 60335-2-30:2009 - TS EN 60335-1:2012
Material Structure: Cold Rolled Sheet Body: 0.80 mm, Frame: 1.00 mm.
Surface Treatment: Your radiator is coated with heat-resistant electrostatic powder paint in our modern facilities, untouched by human hands, and baked at 200°C.
Heater Group: Aluminum wire resistance and convectors
Quality Certificates: CE, ECODESIGN, TS EN ISO 9001:2015
Safety: It is subjected to functional testing, grounding, electrical resistance and leakage current tests.
Warranty: 2 Years
Room Area (m2): 12-24 m2

Solaris 2000W Manual Electric Convector Heater KIP4570M20
The 2000 watt device has a dual power switch. When one stage is turned on, it operates at 1000 watts of power, and when two stages are turned on, it operates at 2000 watts of power. The 1000 watt device has a single power switch.

Temperature Increasing and Decreasing
You can adjust the temperature using the thermostat adjustment button located on the back of the Electric Convector heater. By turning the knob left or right, you can adjust the on-off time of the thermostat that controls your heater and thus enable the device to operate for a short or long time.

Turning Off the Device
When turning off the Electric Convector heater, the supply switch is first turned off and then the plug is removed from the socket.

Plastic feet are also included in the packaging. These plastic feet are free of charge. Wall hanging bracket is optional and subject to a fee.