Excalibur Ceiling Suspension Apparatus

Excalibur Ceiling Suspension Apparatus Ex00930

Excalibur Ceiling Suspension Apparatus
Usage Type: Individual - Household
Color: Black
Dimensions: 15 cm x 7.5 cm
Sheet thickness: 3 mm
D ring: 7mm
Place the Excalibur punching bag ceiling hanger where you decide to mount it.
Mark the hole locations. With a drill with a 10 mm concrete bit, drill the marked places at a depth where the pipe part of the steel dowels can enter. Steel dowels without removing their nuts by gently tapping the screw tip with a hammer as it comes to you, with the screw nut part facing down.
allow it to enter the hole. Ensure that the entire pipe portion of the dowel goes into the hole.
Leave the screw part out. After driving the dowel into the hole, remove the nuts and washers,
place the hanger holes on the screws, reinstall the washers and nuts
and tighten the nuts firmly with a #13 wrench. As you tighten the nuts,
Due to its structure, the steel dowel will be opened inside and compression will be ensured.
If necessary, you can get help from a relative who is experienced in these matters.
The strength of the suspension apparatus is proportional to the strength of your ceiling concrete.