Note: In the model selection table, the outdoor temperature is taken as 8-10 degrees. The heat requirement depends on factors such as the outdoor temperature, the thermal insulation of the room, the number of door openings/closings. The values in the table are valid for average conditions, so the specified factors should be taken into account when calculating the heater power.
All models of Solaris Convector Heaters, which have 1000, 2000 and 2500 watt alternatives; In addition to the stylish design, powerful heating advantage, there is the possibility of using it either portable or fixed. Wall hanging apparatus, including plastic feet, can be supplied as an option.
Solaris 2500 Watt Digital Convector Heater - KIP4570E25
Height: 450mm
Length: 700mm
Depth: 80mm
Weight: 5.8 kg
Electrical Power: 2500 W
Voltage: 220-240V
Current: 10.9 A
Frequency: 50-60 Hz
Electronic Room Temperature Control: Standard
On / Off Switch: Standard
Cable Length: 1.5 m
Protection Class: I
Overtemperature Protection Thermostat: Standard
Power Consumption Indicator: Standard
Ambient Temperature Display: Standard
Daily Programming: Standard
Plastic Feet: Standard
Wall Mount Kit: Optional
Color: White
Digital Electric Convector Heater
The front cover and body of the Electric Convector Heaters are made of sheet metal suitable for cold shaping. The device provides heating with the fins on the resistance placed inside. The cold air entering through the channels on the lower skirt of the body passes through the heated fins of the resistance and comes out as hot air through the air channels on the front cover. The air circulating in this way heats the environment it is in by performing a natural heat transfer.
The paint used in the heaters does not contain any chemicals that are harmful to human health.
Plug the plug into a grounded socket. Turn the Power Switch (see Figure 1) on the right side of the device to the on position (the power switch of the device will be in the "I" shape). Press the On/Off Button of your device for a short time. Your device will turn on. You will see the ambient temperature on the Control Panel while the device is turned on. When you want to increase or decrease the temperature, press and hold the relevant button on the control panel (the button to increase, the button to decrease) until you reach the desired degree.
Programming the Timer / Automatic Power On
Programming covers a period of forty-eight (48) hours. The programmed memory cannot exceed 48 hours, if it is increased more the indicator is reset. 1. First of all the device must be plugged in and the power switch (see Figure 1) must be on (your device's power switch will be in position I) but the on-off button must be in the off position.
2. Press the time setting button without pressing the on-off button. Keep the button pressed until the number of hours after which the device should start working automatically appears on the screen.
3. When the adjustment is completed, a warning light will appear on the display panel and this light will remain on until the device starts working. The device will automatically turn on and start heating the environment at the end of the set time.
Note: If the user makes an incorrect time setting, the device can be reset by turning it on and off using the on-off button.
Programming the Timer / Auto Shutdown
It is a feature that sets the time after which the device will automatically shut down while it is operating. The maximum delay time for the device to shut down is 8 hours.
1. While the device is operating, press and hold the time setting button until the number of hours after which it is desired to turn off appears on the display panel.
2. When the adjustment is completed, the shutdown delay warning light will start to light up on the display panel. This light will continue to light up until the device is turned off and the device will automatically turn off after the number (hour) shown on the display panel.
Note: If the user makes an incorrect time setting, the device can be reset by turning it off and on again using the on-off button.
Key Lock (Child Lock)
When you hold down the key lock button for a while (approximately 3-4 seconds) while your device is operating, the text “LO” appears on the control panel screen. When the buttons of the device are pressed after this setting, it will be seen that the buttons on the control panel do not work. In order for the control panel buttons to work again, the key lock button is pressed for a short time (3-4 seconds) and the text “UL” appears on the screen. When this text appears, the buttons are opened for general use.
Shutting Down the Device
If you press the on/off button for 3-4 seconds without taking your finger off, the device will turn off. The device can also be turned off from the power switch. While the device is operating, turning it off by unplugging the cable or by directly turning the power switch to the "0" position may damage the product. Care should be taken not to turn it off in this manner. First of all, after turning off the device from the on/off button on the control panel or with the remote control, the power switch should be turned off or the device should be unplugged.
Note: In case of power outage in a programmed device, the device keeps the program in its memory and when the power comes back, it continues from where it left off by running the program. If you do not want to continue this program, the power switch of the device must be turned off.