Sulook Ihlas Cebılon Unique Water Purifier Compatible Full Set (5 Filters) (Vontron Membrane)
FILTERS ARE ONLY COMPATIBLE WITH IHLAS CEBİLON UNIQUE MODEL WATER PURIFICATION DEVICES.
COMPATIBLE DEVICE MODELS: IHLAS AURA CEBİLON UNIQUE
FILTER DETAILS
STAGE 1: SEDIMENT (SPUN) FILTER
It provides purification of undissolved particles, dirt, sediment, sand and similar particles in water at the 5 micron level.
STAGE 2: GRANULAR ACTIVATED CARBON (GAC) FILTER (UDF)
It retains organic and chemical substances that cause color, taste and odor in water.
STAGE 3: GRANULAR ACTIVATED CARBON (GAC) FILTER (UDF)
It retains organic and chemical substances that cause color, taste and odor in water.
STAGE 4: VONTRON MEMBRANE FILTER
It provides safe drinking water by removing heavy metals such as Arsenic, Lead, Copper, Barium, Chromium, Mercury, Sodium, Cadmium, Fluoride, Nitrite, and Selenium as well as bacteria and viruses from the waste section.
STAGE 5: POST CARBON FILTER (SWEETENER)
Water purified in the membrane filter will be raw to drink as it is close to purity. Therefore, a post carbon filter made of Coconut Carbon is used to make the taste more palatable.
PRODUCT CONTENT
•12” 5 Micron Spun (Sediment) Filter * 1 piece (Usage life: 6 – 8 months)
•12” GAC Carbon Cartridge Filter (UDF) * 1 piece (Usage life: 6 – 8 months)
•12” GAC Carbon Cartridge Filter (UDF) * 1 piece (Usage life: 6 – 8 months)
•Membrane Filter * 1 piece (Lifespan: 12-24 months)
•10” Inline Coconut Post Carbon Filter * 1 piece (Lifespan: 6 – 8 months)
YOU MUST WASH YOUR FILTERS BEFORE INSTALLATION BY FOLLOWING THE INSTRUCTIONS STATED BELOW.
In order not to damage your membrane filter and to clean the tank from black carbon, your filters must be washed without consuming too much water!!!
Close the ball valve from which you get the line from the network.
Remove all your filters.
Replace the sediment (cotton) filter number 1.
If your filter number 2 is a sediment filter, continue your process from item 8, if it is active carbon (GAC-UDF), continue from item 5.
Replace the number 2 activated carbon (GAC-UDF) filter.
Disconnect the hose located at the outlet of filter number 2 from filter number 3 and place the end of the hose in an empty container.
Open the ball valve, let the water flow through the sediment filter number 1 and the active carbon filter number 2 for about 3-4 minutes. Close the ball valve when you see clear water.
Replace the number 3 block carbon filter (CTO) (reconnect the number 2 filter, which you previously removed one end of.)
Remove the hose between the filter number 3 and the membrane container in any direction you want, place an empty container under it as water will come from the filter number 3 outlet and open the ball valve you got the line from the network again, the water will pass through filters number 1-2 and 3 respectively, let the water run for about 3-4 minutes, close the ball valve after you see clear water.
Reconnect the hose that you previously removed and located between number 3 and the membrane.
Replace your membrane filter and all other filters in your system.
After installing all the filters, open the ball valve and when your system starts the water purification process and your tank is filled with water, empty your first filled tank by opening the tap.
Now you can drink purified water with confidence.