THE PRODUCT WILL BE SHIPPED IN ONE OF THE COLORS GRAY-BEIGE- MUSTARD-YELLOW
OUR PRODUCTS ARE PRODUCED IN 2021
PRODUCT TYPE: ELECTRIC BLANKET
SIZE: DOUBLE 120x160 cm
TECHNICAL INFORMATION
UNIFORM TEMPERATURE DISTRIBUTION, HEAT CONTROLLED, DIRECTLY CONNECTED TO THE MAINS, CLASS II, MOISTUREPROOF BOTTOM BLANKET.
WORKING VOLTAGE: 220-230 V. AC. / 50Hz
RESISTANCE: 660 OHM
POWER: 80 / 40 WATT
CURRENT: 0.330 AMPERS
It is not understood that it works by Exploiting or Manual polling.
The Bottom Blanket should be laid on the bed, starting from the bottom of the pillow, in a way that it will not fold and/or wrinkle.
A sheet with which the bottom blanket can breathe should be tucked under the bed and laid over the bottom blanket. In this way; the lower blanket will be fixed to the bed.
The lower blanket should not be used directly without laying the sheet on the blanket.
If the switch is turned to the Warm (2) position after the plug is inserted, your bed will be warm enough that you can feel its warmth when you lie on it within half an hour.
If the temperature is too high, the switch should be set to the Warm (1) position.
When the temperature setting of your blanket is in the Warm (1) position, it is at a temperature level where you can safely sleep until the morning.
Your blanket; should be unplugged when not in use.
It should not be used with stretch sheets.
Direct bed heating eliminates the need to heat the entire room and saves money.
It relaxes the body.
It helps to remove the moisture of the mattress.
Whether your blanket is warm or not can be understood if it is laid on the bed and covered with a quilt. It does not show its heat when the top is open.
The highest temperature that can be produced by reliable and healthy products in accordance with international standards should be such that it does not exceed body temperature. The temperature of your blanket is at a level that will not disturb you while you sleep, and we recommend that you use your blanket in the WARM (1) position during the night.
Electric Bottom Blanket should not be used as folded and/or creased,
Items that can increase the temperature of the area to be heated should not be placed on the blanket.
It should not be covered over the bed and should be used as specified in the Using the Electric Blanket section.
It should not be used with any electrical source other than the appropriate mains voltage.
It should not be activated when wet. Pressure should not be applied to the heater wire, which will cause hard bends.
It should not be pulled or carried by the cable.
Needles or similar metallic tools should not be used to attach or bundle to the bed.
Check your bottom blanket regularly for any damage or wear.
This Bottom Blanket; It should not be used on foldable or adjustable beds. If it is to be used, the blanket should be checked in order to prevent the blanket cables in the hinge sections from being pinched or folded.
This blanket should not be used by persons who are not sensitive to heat or cannot react to overheating.
This blanket should not be used by children under the age of three as they cannot react to overheating.
This underblanket should not be used by children over the age of three unless they have been adjusted by a parent or caregiver or the child has been fully instructed on how to use the key safely.
The blanket should be allowed to cool before being removed.
During storage, do not place any heavy objects on it that may damage the blanket.
This device is not intended for medical use in hospitals.
This under blanket should be cleaned with a damp sponge or cloth. The bottom blanket is not washed.